Savana 2500 AWD V8-5.3L VIN T (2004)
1. Install the cable.
2. Snap the retainer tabs into the frame bracket.
3. Connect the front cable (2) to the intermediate cable (3).
4. Route the cable in through the floor pan and engage the grommet (1).
5. Remove the safety stands.
6. Lower the vehicle.
7. Install the cable anchor to the stud on the floor.
8. Notice:
Refer to Fastener Notice in Service Precautions.
Install the anchor nut.
^
Tighten the nut to 13 Nm (115 inch lbs.).
9. Roll the carpet into place.
