Savana 2500 AWD V8-5.3L VIN T (2004)
Notice: Refer to Fastener Notice in Service Precautions.
7. Tighten the J41476 mounting bolts until snug. Do not overtighten.
1. Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
2. Tighten the engine rear cover bolts to 25 Nm (18 ft. lbs.).
8. Remove the J41476.
9. Install a NEW crankshaft rear oil seal.
10. Install the engine flywheel.