Savana 2500 AWD V8-5.3L VIN T (2004)
1. Install the engine mount to the vehicle.
2. Install the rear engine mount to the engine mounting bolts from under the vehicle. Do not tighten at this time.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the front engine mount to the engine mounting bolts through the wheelwell.
Tighten the engine mount to engine mounting bolts to 50 Nm (37 ft. lbs.)
4. Lower the engine.
5. Install the engine mount to the frame mounting bolts through the wheelwell.
Tighten the engine mount to frame mounting bolts to 60 Nm (44 ft. lbs.)
6. Install the front propeller shaft, 4WD vehicles only.
7. Install the tire and wheel.
8. Lower the vehicle.