Savana 2500 AWD V8-5.3L VIN T (2004)
Fog/Driving Lamp Switch: Service and Repair
FOG LAMP SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE
IMPORTANT: Avoid excessive force when prying the bezel from the instrument panel extension.
1. Pry the bezel from the instrument panel extension using a flat-bladed tool.
2. Remove the electrical connector from the rear fog lamp switch.
3. Press the tabs on the rear fog lamp switch in order to disengage the tabs from the bezel.
4. Remove the rear fog lamp switch from the vehicle.
INSTALLATION PROCEDURE