Savana 2500 AWD V8-5.3L VIN T (2004)
Resonator: Service and Repair
AIR CLEANER RESONATOR OUTLET DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the clamp and separate the air cleaner resonator outlet duct (1) from the mass air flow/intake air temperature (MAF/IAT) sensor assembly.
2. Loosen the clamp and separate the air cleaner resonator outlet duct from the throttle body assembly.
3. Remove the air cleaner resonator outlet duct.
INSTALLATION PROCEDURE
1. Install the air cleaner resonator outlet duct to the throttle body assembly and the MAF/IAT sensor assembly.
2. Tighten the clamps at the throttle body assembly and the MAF/IAT sensor assembly.