gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Battery Positive Cable Replacement|Page 5925 > < Battery Positive Cable Replacement|Page 5923
Page 3
background image

2. Connect the positive lead to the generator.

Tighten
Tighten the generator output (BAT) nut to 18 N.m (13 lb ft).

3. Raise the vehicle. Refer to Vehicle Lifting.

4. Install the positive lead to the starter solenoid.

Tighten
Tighten the positive lead to starter solenoid to 10 N.m (89 lb in).

5. Lower the vehicle.

Battery Positive Cable Replacement|Page 5925 > < Battery Positive Cable Replacement|Page 5923