Savana 2500 AWD V8-5.3L VIN T (2004)
Steering Shaft: Service and Repair
Seal Replacement - Intermediate Steering Shaft
Seal Replacement - Intermediate Steering Shaft
-
Tools Required
-
J 42640 Steering Column Anti-Rotation Pin
Removal Procedure
1. Notice:
The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or
intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become uncentered, which may cause damage to the
coil assembly.
Install the J 42640 in the steering column lower access hole.
2. Remove the intermediate shaft bearing.
3. Remove the intermediate shaft seal (1) from the intermediate shaft bearing (2).
Installation Procedure
1. Install the intermediate shaft seal (1) to the intermediate shaft bearing (2).
