Savana 2500 AWD V8-5.3L VIN T (2004)
1. Connect the outer tie rod (3) to the inner tie rod (1). Do not tighten the jam nut (2).
2. Connect the outer tie rod to the steering knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the outer tie rod retaining nut.
-
Tighten the nut to 63 Nm (47 ft. lbs.).
4. Important: Be sure the power steering gear boot is not twisted after the toe adjustment.
Check the wheel alignment.