Savana 2500 AWD V8-5.3L VIN T (2004)
1. Install the new inner axle shaft bearing and the new seal to the inner axle shaft housing.
Important: Do not nick or cut the inner axle shaft oil seal.
2. Install the inner axle shaft into the inner axle housing.
Do not install the inner axle shaft completely into the inner axle shaft housing at this time.
3. Apply sealant GM P/N 1052942 (Canadian P/N 10953466) or equivalent to the inner axle housing to differential carrier sealing surface.
4. Install the inner axle shad housing with the inner axle shaft to the differential carrier assembly.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the inner axle shah housing bolts.
Tighten the inner axle shaft housing bolts to 48 Nm (35 ft. lbs.).
