Savana 2500 AWD V8-5.3L VIN T (2004)
6. Install the tripot housing (1) over the spider assembly and seat it in the bushing.
7. Seat the small end of the tripot seal (6) into the groove on the wheel drive shaft.
8. Compress the small clamp using the J43218 or equivalent, until dimension (A) is 0.5 - 1.6 mm (0.02 - 0.06 inch).
9. Fill the joint and seal cavity with the grease supplied in the service kit.
10. Seat the large end of the tripot seal (6) into the groove on the tripot bushing.
