Savana 2500 AWD V8-5.3L VIN T (2004)
Constant Velocity Joint Boot: Service and Repair
Outer Joint and Seal Replacement
Wheel Drive Shaft Outer Joint and Seal Replacement
Tools Required
^
J43218 Clamp Pliers - Narrow Jaw
Disassembly Procedure
1. Wrap a shop towel around the axle shaft.
2. Place the wheel drive shaft horizontally in the bench vise.
3. Remove the large seal clamp (2) and the small seal clamp (1). Use a side cutter or other suitable tool and discard the clamp.