Savana 3/4 Ton Van V6-4.3L VIN W (1998)
7. Use the J 23523-F to remove the crankshaft balancer.
NOTICE: To prevent damage to the end of the crankshaft when using a crankshaft balancer removal too[ install a bolt in the crankshaft. Use a
shorter bolt with the same threads as the crankshaft balancer bolt. This bolt will allow a place for the tool to push against. The shorter bolt is to
keep from going past the threads in the crankshaft and damaging the crankshaft threads.
8. Clean and inspect all parts. Refer to Crankshaft Balancer Clean and Inspect under Engine Unit Repair.
INSTALLATION PROCEDURE
^
Tools Required
-
J 23523-F Balancer Remover and Installer
1. Use J 23523-F to install the crankshaft balancer. Refer to Crankshaft Balancer Installation under Engine Unit Repair.
2. Install the crankshaft pulley.
3. Loosely install the crankshaft pulley bolts.
