Savana 3/4 Ton Van V6-4.3L VIN W (1998)
1.2. Install the engine mount engine bracket and bolts.
^ Tighten the engine mount engine bracket bolts to 51 Nm (38 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount.
3. Install the engine mount to engine mount frame bracket bolts.
^
Tighten the engine mount frame bracket bolts to 58 Nm (43 ft. lbs.).
4. Lower the engine until the engine mounting through-bolt can be insetted.
5. Install the engine mount through-bolt and the nut (left side shown).
^
Tighten the engine mount through-bolt nut to 68 Nm (50 ft. lbs.).
6. Install the starter, if removed.
7. Lower the vehicle.
8. Install the upper fan shroud.
