Savana 3/4 Ton Van V6-4.3L VIN W (1998)
7. Disconnect the A/C vacuum hose from the intake manifold, if equipped with A/C.
8. Remove the vacuum brake booster hose bracket from the upper intake stud.
9. Disconnect the vacuum brake booster hose from the intake manifold.
10. Remove the EVAP canister purge solenoid valve.
11. Disconnect the accelerator control cable from the throttle shaft.
12. Disconnect the cruise control cable.
13. Remove the studs and nuts for the accelerator control cable bracket.
14. Remove the accelerator control cable bracket from the throttle body and the intake manifold.
15. Remove the distributor cap.
16. Remove the ignition coil module.
17. Remove the fuel lines from the fuel meter body assembly.
18. Remove the throttle body assembly.
