Savana 3/4 Ton Van V6-4.3L VIN W (1998)
2.2. Push the crankshaft rear oil seal housing with the seal, fully onto the crankshaft until the housing is contacting the gasket and the engine.
IMPORTANT: Do not oil or grease the seal lip or the crankshaft.
3. Install the three bolts and the one nut to the crankshaft rear oil seal housing.
^
Tighten the crankshaft rear oil seal housing bolts and nut to 12 Nm (106 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the flywheel.
5. Install the transmission assembly.
6. Install the oil pan.
