Savana 3/4 Ton Van V6-4.3L VIN W (1998)
1. Install the engine front cover. Refer to Engine Front Cover Installation under Engine Unit Repair.
NOTICE: Do not reuse the engine front cover. Oil leaks may result. Do not reuse the original seal (O-ring) when installing the Crankshaft
Position (CKP) to the engine front cover. Erratic engine operation may result.
2. Install the CKP sensor with a NEW seal (O-ring).
3. Install the engine oil pan.
4. Connect the Crankshaft Position (CKP) sensor electrical connector.
5. Install the water pump.
6. Install the crankshaft balancer.
