Savana 3/4 Ton Van V6-4.3L VIN W (1998)
Fuel Meter Body: Service and Repair
Fuel Meter Body Assembly Removal and Replacement
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Release Procedure.
3. Remove the electrical connector to the fuel meter body.
4. Remove the fuel feed and return hoses from engine fuel pipes.
5. Remove the upper manifold assembly. Refer to Engine Mechanical.
NOTE: When disconnecting the poppet nozzles, remember the sequence in order to ensure correct poppet nozzle placement to each cylinder.
6. Squeeze the poppet nozzle locking tabs together while lifting the nozzle out of the casting socket.
