Savana 3/4 Ton Van V6-4.3L VIN W (1998)
4. Valve assembly, if necessary.
^
Remove valve spool (41) by pulling and rotating from valve body (43).
^
Remove valve spool O-ring seal (42).
^
Remove valve body teflon rings (46) and O-ring seals (45).
ASSEMBLE
1. Valve assembly, if necessary.
^
Install valve spool O-ring seal (42) to valve spool (41).
^
Lubricate valve spool (41) and O-ring seal (42) with power steering fluid.
^
Install valve spool (41) to valve body (43) by pushing and rotating until hole in valve spool (41) for stub shaft pin is accessible from opposite
end of valve body (43).
2. Stub shaft (40) to valve spool, if necessary and insert pin.
