Savana 3/4 Ton Van V6-4.3L VIN W (1998)
Fluid Line/Hose: Service and Repair
4L80-E Automatic Transmission
REMOVAL PROCEDURE
1. Raise the vehicle.
2. Support the vehicle with safety stands.
3. Remove the two oil cooler lines from the radiator.
4. Disconnect the oil cooler pipe from the connector at the radiator.
5. Disconnect the two oil cooler pipes from the connectors at the radiator. (6.5L diesel engine)
IMPORTANT: Perform the following procedures when removing the retaining ring and cooler line from the quick connect fitting on the
transmission.
