Savana 3/4 Ton Van V6-4.3L VIN W (1998)
Parking Pawl: Service and Repair
REMOVAL PROCEDURE
1. Remove the oil pan and filter.
2. Remove the nut and the pin.
3. Remove the detent lever and the actuator assembly.
4. Remove the bolts and the parking pawl bracket.
5. Remove the parking pawl return spring.
6. Use the modified screw extractor in order to remove the plug.
7. Remove the parking pawl shaft retainer, the shaft and the pawl.
8. Remove the seal and the manual shaft.
INSPECTION PROCEDURE
^
Inspect the following components.
^
The parking pawl
^
The parking pawl shaft
^
The parking pawl return spring
^
The manual shaft
^
The detent lever
