Savana 3/4 Ton Van V6-4.3L VIN W (1998)
7. Remove the shift cable from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: Ensure that the column shift lever and the transmission control lever are in the mechanical park position prior to installing the shift
cable to the vehicle. The transmission control lever can be positioned to the mechanical park position by rotating the control lever clockwise until it
reaches its full clockwise stop position.
1. Install the shift cable to the vehicle.
2. Install the cotter pin and the retaining pin that secures the shift cable to the transmission.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the nut that secures the shift cable and clip to the transmission cable bracket.
^
Tighten the nut that secures the shift cable and clip to the transmission cable bracket to 6 Nm (53 inch lbs.).
4. Install the bolts and nuts that secure the shift cable to the frame rail.
^
Tighten the bolts and nuts that secure the shift cable to the frame rail to 10 Nm (53 inch lbs.).
5. Install the following to the steering column lever:
