gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Driveline Support Replacement|Page 7704 > < Driveline Support Replacement|Page 7702
Page 2
background image

5. Seat the rear yoke properly.
6. Install the new companion flange bolts.

^

Tighten the new companion flange bolts to 102 Nm (75 ft. lbs.).

NOTICE:  Refer to Fastener Notice in Service Precautions.

IMPORTANT:  Discard the bolts to the companion flange. Use new bolts for re-installation.

7. Remove the safety stands.
8. Lower the vehicle. 

Driveline Support Replacement|Page 7704 > < Driveline Support Replacement|Page 7702