Savana 3/4 Ton Van V6-4.3L VIN X (2003)
Parking Brake Shoe: Adjustments
Park Brake Adjustment
Tools Required
-
J21177-A Drum-to-Brake Shoe Clearance Cage
Caution:
Refer to Brake Dust Caution in Service Precautions.
See: Service Precautions/Technician Safety Information/Brake Dust Caution
Important: The park brake shoes must be adjusted before the park brake pedal is adjusted.
1. Set the J21177-A so that it contacts the inside diameter of the rotor.
2. Position the J21177-A over the shoe and the lining at the widest point.
3. Turn the adjuster nut until the lining just contacts the J21177-A.
4. Repeat steps 1-3 for the opposite side.
5. The clearance between the park brake shoe and the rotor is 0.6604 mm (0.026 inch).