Savana 3/4 Ton Van V6-4.3L VIN X (2003)
5. Remove the wheel speed sensor (5) from the hub/bearing assembly (4) shown on the 2500/3500 series.
6. Remove the WSS cable mounting clip from the knuckle.
7. Remove the WSS cable mounting clip from the upper control arm.
8. Remove the WSS cable mounting clip from the frame attachment point.
9. Remove the WSS cable electrical connector.
Installation Procedure
1. Install the WSS (5) into the hub/bearing assembly (4) shown on the 2500/3500 series.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice