Savana 3/4 Ton Van V6-4.3L VIN X (2003)
4. If equipped with a 6.0L engine, perform the following:
4.1.
Install the oil cooler hoses to the hose clip on the fan shroud.
4.2.
Snap the oil cooler hose clip shut.
Important:
^
Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new cap. Install the cap on to the cooler line prior to cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
^
Connect the oil cooler lines.
5. If equipped with a 8.1L engine, perform the following:
5.1.
Install the oil cooler hoses to the clip.
5.2.
Install the oil cooler lines to the radiator.
Insert the cooler line end into the quick connect fitting until a click is either heard or felt.
5.3.
Pull back sharply on the cooler line in order to ensure that the cooler line is installed in the quick connect fitting.
