Savana 3/4 Ton Van V6-4.3L VIN X (2003)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement (Uplevel Vehicles)
PARK/TURN SIGNAL LAMP REPLACEMENT (UPLEVEL VEHICLES)
REMOVAL PROCEDURE
1. Remove the screws (4) from the park/turn signal lamp to the grille.
2. Remove the park/turn signal lamp (3) from the grille.
3. Disconnect the bulb socket(s) (1) from the park/turn signal lamp by turning the bulb sockets in a counterclockwise direction.
4. Remove the bulb(s) (1) from the socket.
INSTALLATION PROCEDURE
1. Install the bulb(s) (1) into the socket by turning the bulb sockets in a clockwise direction.
2. Connect the bulb socket(s) (1) into the park/turn signal lamp.
3. Install the park/turn signal lamp (3) to the grille (5).
4. Install the park/turn signal lamp retaining screws (4) to the grille.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.5 N.m (13 lb in).
