Savana 3/4 Ton Van V6-4.3L VIN X (2003)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (2WD)
Caution:
Refer to Brake Dust Caution in Service Precautions.
See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake Dust Caution
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor (2) shown on the 1500 series.
4. Remove the Wheel Speed Sensor (WSS) mounting bolt.
Notice:
Carefully remove the sensor by pulling it straight out of the bore. DO NOT use a screwdriver, or other device to pry the sensor out of the
bore. Prying will cause the sensor body to break off in the bore.