Savana 3/4 Ton Van V6-4.3L VIN X (2003)
1. Install the pitman arm to the power steering gear.
2. Align the marks made at the removal on the pitman arm and the pitman arm shaft.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install a new pitman arm washer and nut.
Tighten the nut to 250 Nm (184 ft. lbs.).
4. Remove the power steering gear from the vise.
5. Install the power steering gear.
6. Lower the vehicle.
7. Check the wheel alignment.