Savana 3/4 Ton Van V6-4.3L VIN X (2003)
Steering Shaft: Service and Repair
Seal Replacement - Intermediate Steering Shaft
Seal Replacement - Intermediate Steering Shaft
Tools Required
-
J42640 Steering Column Anti-Rotation Pin
Removal Procedure
Notice: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or
intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become centered, which may cause damage to the coil
assembly.
1. Install the J42640 in the steering column lower access hole.
2. Remove the intermediate shaft bearing.
3. Remove the intermediate shaft seal (1) from the intermediate shaft bearing (2).
Installation Procedure