Savana 3/4 Ton Van V6-4.3L VIN X (2003)
12. Remove the shift cable from the stud ball.
13. Remove the locking clip from the cable at the bracket.
14. Lower the vehicle.
15. Remove the shift cable from the vehicle.
Installation Procedure
Important: Prior to installing the shift cable to the vehicle, ensure that the column shift lever and the transmission control lever are in the mechanical
park position. The transmission control lever can be positioned to mechanical park by rotating the control lever clockwise until it reaches its full
clockwise position.
1. Install the shift cable to the vehicle.
2. Raise the vehicle.
3. Remove the black shipping tab from the transmission end of the shift cable and discard the tab.
4. Install the ball stud on the transmission.
