GMC Savana 3/4 Ton Van Driveline Support Replacement
2. Install the propeller shaft hanger bolts.
^
Tighten the propeller shaft hanger bolts to 38 Nm (28 ft. lbs.) (155 inch wheel base vehicles).
^
Tighten the propeller shaft hanger bolts to 58 Nm (43 ft. lbs.) (for all other vehicles).
3. Install the center bearing (5) to the propeller shaft hanger (1).
4. Install the center bearing support bolts (3).
Tighten the center bearing support bolts to 58 Nm (43 ft. lbs.).
5. Remove the safety stands.
6. Lower the vehicle.
