Savana 3/4 Ton Van V8-5.3L VIN T (2003)
Installation Procedure
1. Position the power seat switch bracket (2) to the seat cushion frame, if equipped.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws (3) to retain the power seat switch bracket.
Tighten the screws to 2 N.m (18 lb in).
3. Install the bolts (4) retaining the seat cushion frame to the adjuster.
4. Install the bolts (4) to retain the seat cushion frame to the adjuster.
Tighten the screws to 25 N.m (18 lb ft).
5. Install the bolts (7) to retain the seat cushion frame.
6. Install the bolts (7).
