Savana 3/4 Ton Van V8-5.3L VIN T (2003)
6. Remove the engine mount to the engine mounting bolts.
7. Remove the engine mount from the vehicle.
Installation Procedure
1. Install the engine mount to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount to the engine mounting bolts.
-
Tighten the engine mount to engine mounting bolts to 50 Nm (37 ft. lbs.)
3. Lower the engine.
4. Install the engine mount to the frame mounting bolts.
-
Tighten the engine mount to frame mounting bolts to 60 Nm (44 ft. lbs.)
5. Install the right side exhaust manifold.
6. Install the starter.
7. Lower the vehicle.