Savana 3/4 Ton Van V8-5.3L VIN T (2003)
Manifold Absolute Pressure (MAP) Sensor: Service and Repair
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
3. Remove the MAP sensor (1) from the intake manifold.
INSTALLATION PROCEDURE
IMPORTANT: Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.
1. Install the MAP sensor to the upper intake manifold.
2. Connect the MAP sensor electrical connector.
3. Install the engine cover.
