Savana 3/4 Ton Van V8-5.3L VIN T (2003)
3. Install the seat cushion cover (1).
4. Slide the center seat belt retractor into key hole slots in the seat back frame.
5. Carefully pull the rear seat back trim down enough to expose the center seat belt retractor bolt hole.
6. Install the center seat belt retractor bolt.
Tighten
Tighten the center seat belt retractor upper bolt to 52 N.m (38 lb ft).
7. Install the center seat belt retractor trim cover (2).
8. Install the center seat belt retractor trim cover bolt (1).
Tighten
Tighten the center seat belt retractor trim cover bolt to 1.5 N.m (13 lb in).
