Savana 3/4 Ton Van V8-5.3L VIN T (2003)
2. Place a 12 V minimum/2 A minimum power source (i.e., vehicle battery) near the shorted end of the SIR deployment harness.
3. Connect the SIR deployment harness wires to the power source. Pretensioner module deployment will occur when contact is made.
4. Disconnect the SIR deployment harness from the power source.
5. Seat one banana plug into the other in order to short the deployment harness leads.
6. If the pretensioner module did not deploy, disconnect the adapter and discontinue the procedure. Contact the Technical Assistance Group for
further assistance. Otherwise, proceed to the following steps.
7. Put on a pair of shop gloves.
8. Disconnect the pigtail adapter from the pretensioner module as soon as possible.
9. Dispose of the deployed pretensioner module through normal refuse channels.
10. Wash hands with a mild soap.
