Savana 3/4 Ton Van V8-5.3L VIN T (2003)
Control Arm: Service and Repair
Upper Control Arm Replacement
Upper Control Arm Replacement
-
Tools Required
-
J 43631 Ball Joint Remover
-
J 45851 Ball Joint Separator Protector Adapters
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Support lower control arm with a jack stand.
3. Remove the tire and wheel.
4. Remove the retaining bolts for the brake hose and the wheel speed sensor brackets.
5. Remove the wheel drive shaft (4WD only).
