gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Door Handle Replacement|Page 8007 > < Front Door Exterior Handle|Service and Repair
Page 1
background image

Front Door Interior Handle: Service and Repair
Door Handle Replacement

Door Handle Replacement - Inside

Removal Procedure

1. Remove the front door trim panel. Refer to Trim Panel Replacement - Door  (See: Front Door Panel/Service and Repair) .
2. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door  See: Front Door Panel/Service and Repair

3. Remove the push pin rivet (6) at the rear edge of the inside handle (5).
4. Slide the inside handle (5) forward.
5. Remove the inside handle (5) from the door module.
6. Remove the lock rods (4) from the inside handle (5).

Installation Procedure

1. Install the lock rods (4) to the inside door handle (5).
2. Align the inside handle (5) with the slots in the door module.
3. Slide the inside handle (5) rearward in order to engage the inside handle (5) with the door module.
4. Install the push pin rivet (6) to the rear edge of the inside handle (5).
5. Install the front door water deflector. Refer to Water Deflector Replacement - Front Door  See: Front Door Panel/Service and Repair

Install the front door trim panel. Refer to Trim Panel Replacement - Door  (See: Front Door Panel/Service and Repair) .

Door Handle Replacement|Page 8007 > < Front Door Exterior Handle|Service and Repair