Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Sliding Door Handle: Service and Repair
Inside Handle Replacement - Sliding Door
Inside Handle Replacement - Sliding Door
Tools Required
J 9886-01 Door Handle Clip Remover
Removal Procedure
1. Using the J 9886-01 , release the retaining clip on the sliding side door inside handle.
2. Remove the sliding side door inside handle from the sliding side door control assembly.
3. Remove the sliding side door inside handle from the vehicle.
Installation Procedure
1. Install the sliding side door inside handle to the vehicle.
2. Install the sliding side door inside handle to the control assembly.
3. Press on the sliding side door inside handle in order to engage the retaining clip.