gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Console and Mounting Bracket Replace - Overhead (Luxury Y91)|Page 8301 > < Console and Mounting Bracket Replace - Overhead (Luxury Y91)|Page 8299
Page 1
background image

Console: Service and Repair
Overhead Console Replacement - Intermediate (Luxury Y91)

Overhead Console Replacement - Intermediate (Luxury Y91)

Removal Procedure

1. Remove the screws from the overhead console.
2. Remove the screw from the dome lamp housing.
3. Remove the overhead console by pulling down in order to release the retaining clips from the mounting bracket.
4. Disconnect the electrical connectors from the overhead console. 

Installation Procedure

1. Connect the electrical connectors to the overhead console.
2. Install the overhead console by pushing up the console in order to engage the retaining clips into the mounting bracket.

Notice:  Refer to Fastener Notice  in Cautions and Notices.

3. Install the screws that retain the overhead console to the mounting bracket. 

Tighten the overhead console screws to 2 N.m (18 lb in). 

4. Install the screw to the inside of the dome lamp housing.

Tighten the screw to 2 N.m (18 lb in). 

Console and Mounting Bracket Replace - Overhead (Luxury Y91)|Page 8301 > < Console and Mounting Bracket Replace - Overhead (Luxury Y91)|Page 8299