Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
2. Press on the body side rear upper garnish molding in order to engage the retaining clips.
Body Side Trim Panel Replacement - Left Side
Body Side Trim Panel Replacement - Left Side
Removal Procedure
1. Remove the rear passenger seats as needed. Refer toRear Bench Seat Replacement (All Except Luxury) (See: Seats/Service and Repair/Rear
Bench Seat Replacement (All Except Luxury))Rear Bench Seat Replacement (Luxury Y91) (See: Seats/Service and Repair/Rear Bench Seat
Replacement (Luxury Y91)) in Seats.
2. Remove the driver side body side rear trim panel. Refer to Body Side Rear Trim Panel Replacement (See: Body Side Rear Trim Panel
Replacement) .
3. Remove the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement (See: Lower Pillar Garnish Molding
Replacement) .
4. Grasp and gently pull the body side front lower trim panel in order to disengage the retainer clips.
5. Remove the body side front lower trim panel from the vehicle.
6. Inspect the body side front lower trim panel for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
1. Install the body side front lower trim panel to the vehicle.
2. Press on the body side front lower trim panel in order to engage the retaining clips.
3. Install the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement (See: Lower Pillar Garnish Molding