Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet
TOOLS REQUIRED
J 39529 Heater Hose Pliers
REMOVAL PROCEDURE
1. Partially drain the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the air cleaner, if necessary.
3. Remove the coolant recovery reservoir or the surge tank.
4. Remove the hose clamps using the J 39529.
5. Remove the hose support clamps, the brackets, or the retainers as necessary.
6. Remove the heater hose from the vehicle.
INSTALLATION PROCEDURE
