Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
1. Install the water pump gasket.
2. Apply a bead of anaerobic sealer GM P/N 1052942 or the equivalent to the water pump plate.
3. Install the water pump to the backing plate.
4. Apply high temperature thread adhesive GM P/N 12345493 or equivalent, to the bolt threads.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the mounting bolts behind the water pump plate.
^
Tighten the water pump plate bolts to 28 Nm (20 ft. lbs.).
6. Install the water pump and backing plate to the engine. The sealer must be wet to the touch when installing the plate.
7. Apply Teflon Pipe Sealant GM P/N 123456004 or equivalent to the thread of the bolts and the studs.
8. Install the bolts and the studs.
^
Tighten the water pump to the front cover bolts to 42 Nm (32 ft. lbs.).
^
Tighten the water pump plate to the front cover to 28 Nm (20 ft. lbs.).
