Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
8. Remove the bolts retaining the engine mount bracket to the engine block.
9. Remove the engine mount bracket.
10. Remove the bolts retaining engine mount to the engine mount frame bracket.
11. Remove the engine mount.
Installation Procedure
1. Install the engine mount to the engine mount frame bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts.
^
Tighten the engine mount bolts to 59 Nm (44 ft. lbs.).
