Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
25. Install the IAT sensor.
^
Tighten the IAC sensor to 25 Nm (18 ft. lbs.).
26. Connect the Intake Air Temperature (IAT) sensor electrical connector.
27. Install the CDR valve.
28. Install the bracket for retaining the CDR valve to the right side lower intake manifold studs.
^
Tighten the bracket nuts to 23 Nm (17 ft. lbs.).
29. Instal the electrical harness and retaining brackets and nuts.
30. Install the nuts retaining the fuel pipe brackets,
^
Tighten the bracket nuts to 23 Nm (17 ft. lbs.).
