gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Intake Manifold Replacement - Lower|Page 2135 > < Intake Manifold Replacement - Lower|Page 2133
Page 12
background image

39. Install a small amount of RTV sealant GM P/N 12346286 to the area on the upper tube where it joins with the lower tube.
40. Install the upper oil level indicator tube.
41. Install the nut retaining the oil level indicator tube to the thermostat cross over.

^

Tighten the oil level indicator tube nut to 22 Nm (16 ft. lbs.).

42. Install the oil level indicator.
43. For the 6.5L diesel engine, install the bolt and the nut securing the oil level indicator tube brackets to the engine.

^

Tighten the bolt to 47 Nm (35 ft. lbs.).

^

Tighten the nut to 25 Nm (18 ft. lbs.).

44. Fill the engine coolant. 
45. Recharge the A/C system, if required. 

46. Install the air intake duct from the turbocharger.
47. Connect the battery negative cable from the battery. 
48. Install the air cleaner assembly from the vehicle. 
49. Install the engine cover from the vehicle. 

Intake Manifold Replacement - Lower|Page 2135 > < Intake Manifold Replacement - Lower|Page 2133