Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Heat Shield: Service and Repair
Exhaust Heat Shield Replacement Body Panel
Exhaust Heat Shield Replacement Body Panel
^
Tools Required
-
J 34940 Rivet Gun
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Using a 1/4 inch (6 mm) drill bit, remove the rivets from the heat shields, as necessary.
3. Remove the exhaust tailpipe heat shield from the vehicle.
4. Remove the exhaust tailpipe heat shield from the vehicle.
