Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Tighten the screws to 4 N.m (35 lb in).
3. Install the retaining screws to the air distribution case.
Tighten
Tighten the retaining screws to 4 N.m (35 lb in).
4. Roll in the instrument panel. Refer to IP Carrier Replacement in Instrument, Panel, Gages and Console.
5. Install the left instrument panel outlet duct to the vehicle.
6. Install the instrument panel cluster bezel. Refer to Trim Plate Bezel Replacement - IP Cluster in Instrument, Panel, Gages and Console.
7. Install the center floor duct. Refer to Air Outlet Duct Replacement - Center Floor.
8. Install the right floor duct.
9. Install the left floor duct. Refer to Air Outlet Duct Replacement - Left Floor.
10. Install the engine cover.
