Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
6. Remove the compressor hose assembly (4) from the condenser.
7. Remove the compressor hose assembly bolt (2) from the compressor (6).
8. Remove the compressor hose assembly from the compressor.
9. Cap or plug all open connections to prevent contamination.
10. Remove the hose (3) from the vehicle.
INSTALLATION PROCEDURE
1. Remove the cap or plugs from the connections.
2. Install the hose (3) to the compressor.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the compressor hose assembly retaining bolt (2) to the compressor.
Tighten
Tighten the hose retaining bolt to 45 N.m (33 lb ft).
4. Install the compressor hose assembly to the condenser (4).
Tighten
Tighten the A/C line to the condenser to 28 N.m (21 lb ft).
