gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement|Page 6925 > < Compressor Hose Assembly Replacement|Page 6923
Page 1
background image

Hose/Line HVAC: Service and Repair
Evaporator Tube Replacement - Auxiliary

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
2. Remove the engine cover.
3. Remove the auxiliary evaporator hose (1) from the condenser hose (3).
4. Remove the retaining nut form the engine.

5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
6. Remove the auxiliary evaporator tube (1) retaining nuts (2) from the body.
7. Remove the bolt retaining the hose to the transmission bracket.
8. Remove the evaporator tube from the rear evaporator hose.
9. Remove the evaporator tube from the vehicle.

INSTALLATION PROCEDURE

NOTE:  Refer to Fastener Notice in Service Precautions.

Compressor Hose Assembly Replacement|Page 6925 > < Compressor Hose Assembly Replacement|Page 6923